I need help with my 95 eclipse turbo

[mysporttruck]

i need help putting in a g16 turbo into my 95 eclipse the problems im running into are what do i do with the coolant lines that run through my stock turbo do i plug em or what?? cause the g16 turbo has two inlets the oil inlet line and oil outlet line there are no fittings for the coolant lines at all so what do i do with em... and also on the wastegate which is aftermarket ofcourse.... it has two vacuum lines going off of it too one on the bottom side of it and one on the top where do i connect the lines to????

[JoeThaMan]

If your new turbo doesn't have the ports for coolant, then you will just need to plug the ones that fed the stock turbo. For the wastegate, if it is an external wastegate, you will need to use the side port and leave the top one open.

[mysporttruck]

yeah but where do i connect the wastegate lines? and yes it is external and if i plug all the coolant lines will it cause any heat problems for my turbo?

[8UR VTEC]

what make is the wastegate? most of the good company's have instructions on there sites. a 16g doesn't have any coolant inlets?

[mysporttruck]

no the g16 that i have doesnt have any it just has a oil inlet and outlet for the oil inline and return line.... and it doesnt say the make but it is very similar if exactly the same as the hks wastegate or the greddy wastegate between those two.. it has a threaded hole on the bottom-side of it and one on top

[PORTnPOLISH97]

If your talking about the 16g(never heard of g16???)They never came dry to my knowledge. DO NOT PLUG THE COOLANT LINES!!!!! you need to pickup a 1g non-turbo water line. You need to buy a 16g with water inlets and outlets though. If you need help with the install just PM me.

Also not that I am a moderator but I believe this is in the wrong forum.